Simple wall with options for different edges
销孔直径（mm）
每个铰链件
每个边缘的铰链数量
使用的铰链样式
radius of the eye (multiples of thickness)
space between eyes (multiples of thickness)
minimum space around the hinge (multiples of thickness)
angle of the hooks bending outward
radius at the bottom (multiples of thickness)
length of the hooks (multiples of thickness)
凹槽应该加宽多少（-80到80）
how far the dove tails stick out of/into the edge (multiples of thickness)
radius used on all four corners (multiples of thickness)
from one middle of a dove tail to another (multiples of thickness)
卡榫样式
space at the start and end in multiple of normal spaces
height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!
space below holes of FingerHoleEdge (multiples of thickness)
extra material to grind away burn marks (multiples of thickness)
width of the fingers (multiples of thickness)
extra space to allow finger move in and out (multiples of thickness)
space between fingers (multiples of thickness)
width of finger holes (multiples of thickness)
压力角
间隙
齿轮模数（mm）
剖面偏移
向外延伸直边
“波浪”或“颠簸”
凹槽的深度
两侧有盖子重叠（类似于起始边）
设置为较低的值以获取引脚周围的磁盘
“开始”或“冲洗”
diameter of the pin hole (multiples of thickness)
fixed length of the grips on he lids (multiples of thickness)
thickness of the arc holding the pin in place (multiples of thickness)
whether to include finger joints on the edge with the box
whether to include finger joints on the edge with the lid
radius of the disc rotating in the hinge (multiples of thickness)
width of the "finger hole" in mm
additional pin for better positioning
position(s) of the extra locking springs in the lid
内侧角度
height of strips to be glued to the inside of bottom edges (multiples of thickness)
height of the feet (multiples of thickness)
distance from finger holes to bottom edge (multiples of thickness)
width of the feet (multiples of thickness)
inner width in mm
inner height in mm
底边的边缘类型
右边缘的边缘类型
顶边的边缘类型
左边缘的边缘类型
thickness of the material (in mm) 🛈
format of resulting file 🛈
width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈
Add a QR Code with link or command line to the generated output
print surrounding boxes for some structures 🛈
label the parts (where available)
print reference rectangle with given length (in mm)(zero to disable) 🛈
style for inner corners 🛈
burn correction (in mm)(bigger values for tighter fit) 🛈
生成 Download Save to URL QR Code
