Spielkartenaufbewahrung

Box for storage of playing cards, with versatile options

Einstellung für Fingerzinken

Stil

style of the fingers

umliegende Fläche

space at the start and end in multiple of normal spaces

bottom_lip

height of the bottom lips sticking out (multiples of thickness) FingerHoleEdge only!

Kantenbreite

space below holes of FingerHoleEdge (multiples of thickness)

extra_length

extra material to grind away burn marks (multiples of thickness)

Zapfen

width of the fingers (multiples of thickness)

Bewegungsfreiraum

extra space to allow finger move in and out (multiples of thickness)

Abstand

space between fingers (multiples of thickness)

Breite

width of finger holes (multiples of thickness)

Einstellung der Spielkartenaufbewahrung

Innere Tiefe in mm (außer wenn Außenmaß markiert ist)

Innere Höhe in mm (außer wenn Außenmaß markiert ist)

Außenmaß

treat sizes as outside measurements 🛈

sections left to right in mm 🛈

openingdirection

Direction in which the lid slides open. Lid length > Lid width recommended.

fingerhole

Depth of cutout to grab the cards

fingerhole_depth

Depth of cutout if fingerhole is set to 'custom'. Disabled otherwise.

add_lidtopper

Add an additional lid topper for optical reasons and customisation

Standardeinstellungen

Stärke

thickness of the material (in mm) 🛈

Format

format of resulting file 🛈

Laschen

width of tabs holding the parts in place (in mm)(not supported everywhere) 🛈

qr_code

Add a QR Code with link or command line to the generated output

debug

print surrounding boxes for some structures 🛈

labels

label the parts (where available)

Referenz

print reference rectangle with given length (in mm)(zero to disable) 🛈

inner_corners

style for inner corners 🛈

burn

burn correction (in mm)(bigger values for tighter fit) 🛈

Description

Versatile Box for Storage of playing cards. Multiple different styles of storage are supported, e.g. a flat storage or a trading card deck box style storage. See images for ideas.

Building instructions

Place inner walls on floor first (if any). Then add the outer walls. Glue the two walls without finger joins to the inside of the side walls. Make sure there is no squeeze out on top, as this is going to form the rail for the lid.

Add the top of the rails to the sides (front open) or to the back and front (right side open) and the grip rail to the lid. Details of the lid and rails Details Whole box (early version still missing grip rail on the lid):

Boxes.py